$A$ sample of a liquid is kept at $1 \ atm$. It is compressed to $5 \ atm$,which leads to a change of volume of $0.8 \ cm^3$. If the bulk modulus of the liquid is $2 \ GPa$,the initial volume of the liquid was . . . . . . litre. (Take $1 \ atm = 10^5 \ Pa$)

$A$ sample of a liquid has an initial volume of $1.5\,L$. The volume is reduced by $0.2\,mL$ when the pressure increases by $140\,kPa$. What is the bulk modulus of the liquid?

$1\, m^3$ of water is brought inside a lake up to a depth of $200\, m$ from the surface. What will be the change in volume if the bulk modulus of elasticity of water is $22000\, \text{atm}$? (Given: density of water $\rho = 1\times10^3\, kg/m^3$, atmospheric pressure $P_0 = 10^5\, N/m^2$, and $g = 10\, m/s^2$)

The bulk modulus of copper is $1.4 \times 10^{11} \ Pa$ and the coefficient of linear expansion is $1.7 \times 10^{-5} (^{\circ}C)^{-1}$. What hydrostatic pressure is necessary to prevent a copper block from expanding when its temperature is increased from $20^{\circ}C$ to $30^{\circ}C$?

The fractional compression $\left(\frac{\Delta V}{V}\right)$ of water at a depth of $2.5 \ km$ below the sea level is . . . . . . $\%$. Given: the Bulk modulus of water $B = 2 \times 10^9 \ N m^{-2}$,density of water $\rho = 10^3 \ kg m^{-3}$,and acceleration due to gravity $g = 10 \ m s^{-2}$.

An increase in pressure required to decrease the $200 \ L$ volume of a liquid by $0.004\%$ in a container is .......... $kPa$ (Bulk modulus of the liquid $= 2100 \ MPa$).