$A$ uniform metal wire has length $L$,mass $M$,and cross-sectional area $A$. It is under tension $T$,and $V$ is the speed of a transverse wave along the wire. The density of the wire is:

$A$ steel wire has a length of $12.0 \;m$ and a mass of $2.10 \;kg$. What should be the tension in the wire so that the speed of a transverse wave on the wire equals the speed of sound in dry air at $20\,^{\circ}C = 343 \;m s^{-1}$?

$A$ uniform string of length $20 \ m$ is suspended from a rigid support. $A$ short wave pulse is introduced at its lowest end. It starts moving up the string. The time taken to reach the support is (take $g = 10 \ ms^{-2}$):

$A$ sitar wire is replaced by another wire of same length and material but of three times the earlier radius. If the tension in the wire remains the same,by what factor will the frequency change?

$A$ string $1\,m$ long is driven by a $300\,Hz$ vibrator attached to its end. The string vibrates in three segments. The speed of transverse waves in the string is equal to ..... $m/s$.

$A$ uniform rope of length $12 \ m$ and mass $6 \ kg$ hangs vertically from a rigid support. $A$ block of mass $2 \ kg$ is attached to the free end of the rope. $A$ transverse pulse of wavelength $0.06 \ m$ is produced at the lower end of the rope. The wavelength of the pulse when it reaches the top of the rope is (in $m$)