A force F is needed to break a copper wire ha | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The breaking force of a wire is determined by its breaking stress,which is a material property. The breaking force $F$ is given by the product of

Vedclass · Accepted Answer

$4F$

Vedclass · Answer

(C) The breaking force of a wire is determined by its breaking stress,which is a material property. The breaking force $F$ is given by the product of breaking stress $\sigma$ and the cross-sectional area $A$ of the wire.$F = \sigma 	imes A = \sigma 	imes (\pi R^2)$Since the material is the same (copper),the breaking stress $\sigma$ remains constant.Therefore,$F \propto R^2$.If $F_1 = F$ for radius $R_1 = R$,and $F_2$ is the force for radius $R_2 = 2R$,then:$\frac{F_2}{F_1} = \left(\frac{R_2}{R_1}ight)^2 = \left(\frac{2R}{R}ight)^2 = 4$$F_2 = 4F_1 = 4F$.

$A$ force $F$ is needed to break a copper wire having radius $R$. The force needed to break a copper wire of radius $2R$ will be

Similar Questions

Why do rail tracks have an '$I$-shaped' girder?

Explain Hooke's Law.

What is called a brittle material? What is called a ductile material?

The elastic limit of brass is $3.5 \times 10^{10} \, N/m^2$. Find the maximum load that can be applied to a brass wire of $0.75 \, mm$ diameter without exceeding the elastic limit $....... \times 10^4 \, N$.

One end of a uniform wire of length $L$ and weight $W$ is attached rigidly to a point in the roof,and a weight $W_1$ is suspended from its lower end. If $S$ is the area of cross-section of the wire,the stress in the wire at a height $3L/4$ from its lower end is

Vedclass Test Series

Exam Paper Generator

Online Exam Module