$A$ steel wire of length $20 \text{ cm}$ and area of cross-section $1 \text{ mm}^2$ is tied rigidly at both the ends. When the temperature of the wire is changed from $40^{\circ} \text{C}$ to $20^{\circ} \text{C}$, find the change in its tension. Given, the coefficient of linear expansion for steel is $\alpha = 1.1 \times 10^{-5} {}^{\circ} \text{C}^{-1}$ and Young's modulus of steel is $Y = 2.0 \times 10^{11} \text{ N/m}^2$. (in $\text{ N}$)

In an experiment to determine the Young's modulus of a wire of length exactly $1\;m$,the extension in the length of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.02\;mm$ when a load of $1\;kg$ is applied. The diameter of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.01\;mm$. The error in the measurement of Young's modulus $(\Delta Y)$ is found to be $x \times 10^{10}\;N/m^2$. The value of $x$ is (Take $g = 10\;m/s^2$)

Two masses $m_1$ and $m_2$ are connected by a light string passing over a pulley as shown in the figure. If the cross-sectional area of the string is $S$,its length is $L$,and its Young's modulus is $Y$,what is the elongation in the string?

Two persons pull a wire towards themselves. Each person exerts a force of $200 \, N$ on the wire. Young's modulus of the material of the wire is $1 \times 10^{11} \, N \, m^{-2}$. The original length of the wire is $2 \, m$ and the area of cross-section is $2 \, cm^2$. The wire will extend in length by $...... \, \mu m$.

$A$ steel ring of radius '$r$' is to be fitted over a wooden disc of radius '$R$' $(R > r)$. The force required to expand the ring so that it fits over the disc is ($Y =$ Young's modulus of steel,$A =$ area of cross-section of the wire).

$A$ $500 \,g$ ball is attached to one end of an aluminum wire of area of cross-section $0.5 \,mm^2$ and an unstretched length of $1.4 \,m$. The other end of the wire is fixed to the top of a vertical pole. The ball rotates about the pole in a horizontal plane such that the angle between the wire and the horizontal is $30^{\circ}$. The increase in the length of the wire is . . . . . . $mm$. (Young's modulus of aluminum $= 0.7 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)