$A$ moving coil galvanometer, when shunted with a $2\text{ }\Omega$ resistance, gives a full-scale deflection for a current of $500\text{ mA}$. When a resistance of $470\text{ }\Omega$ is connected in series, it gives a full-scale deflection for a potential of $10\text{ V}$ applied across it. The value of the resistance of the galvanometer coil is . . . . . . $\Omega$.

Consider a moving coil galvanometer $(MCG)$ :
$A :$ The torsional constant in a moving coil galvanometer has dimensions $[ML^2 T^{-2}]$.
$B :$ Increasing the current sensitivity may not necessarily increase the voltage sensitivity.
$C :$ If we increase the number of turns $(N)$ to its double $(2N)$,then the voltage sensitivity doubles.
$D :$ $MCG$ can be converted into an ammeter by introducing a shunt resistance of a large value in parallel with the galvanometer.
$E :$ Current sensitivity of $MCG$ depends inversely on the number of turns of the coil.
Choose the correct answer from the options given below:

$A$ galvanometer has a resistance of $7\,\Omega$ and gives a full-scale deflection for a current of $1.0\,A$. How will you convert it into a voltmeter of range $10\,V$?

Consider two identical galvanometers and two identical resistors with resistance $R$. If the internal resistance of the galvanometers is $R_G < R/2$,which of the following configurations yield the maximum voltage range and maximum current range?

Explain the solution to the difficulties that arise when using a galvanometer directly as an ammeter.

The maximum current that can be measured by a galvanometer of resistance $40 \,\Omega$ is $10 \,mA$. It is converted into a voltmeter that can read up to $50 \,V$. The resistance to be connected in series with the galvanometer is ... (in $\Omega$)