$A$ heat flux of $4000 \, J/s$ passes through a rod of length $10 \, cm$ and cross-sectional area $100 \, cm^2$. The thermal conductivity of copper is $400 \, W/m^{\circ}C$. The ends of the rod must be maintained at a temperature difference of ....... $^{\circ}C$.

$A$ brass rod of length $2 \ m$ and radius $1 \ cm$ has one end maintained at $250 \ ^oC$. When steady state is reached, the rate of heat flow through any cross-section is $0.5 \ cal \ s^{-1}$. Find the temperature of the other end in $^oC$. (Thermal conductivity of brass $K = 0.26 \text{ cal s}^{-1} \text{ cm}^{-1} \text{ } ^\circ\text{C}^{-1}$)

The coefficient of thermal conductivity of a rod depends on its

What properties should a material used for making a cooking pot possess? ($K =$ thermal conductivity,$S =$ specific heat capacity)

There is a layer of snow $x \ cm$ thick on water,when the temperature of the air is $-\theta ^\circ C$ (less than the freezing point). If the thickness of the layer increases from $x$ to $y$ in time $t$,then the value of $t$ is given by:

Two bars of thermal conductivities $K$ and $3K$ and lengths $1\, cm$ and $2\, cm$ respectively have equal cross-sectional area. They are joined length-wise as shown in the figure. If the temperatures at the ends of this composite bar are $0\,^{\circ}C$ and $100\,^{\circ}C$ respectively,then the temperature $\varphi$ of the interface is......... $^oC$.