The thermal conductivity of copper is $9$ times that of steel. Find the temperature of the junction of copper and steel in the composite rod as shown in the figure (in $^oC$).

$A$ slab of stone of area $3600 \, cm^2$ and thickness $10 \, cm$ is exposed on the lower surface to steam at $100^{\circ} C$. $A$ block of ice at $0^{\circ} C$ rests on the upper surface of the slab. In one hour, $4.8 \, kg$ of ice is melted. The thermal conductivity of the stone in $J \, s^{-1} \, m^{-1} \, K^{-1}$ is (Latent heat of ice $= 3.36 \times 10^5 \, J/kg$)

$A$ wall consists of two layers $A$ and $B$. The two layers have the same thickness but are made of different materials. The thermal conductivity of $A$ is twice that of $B$. Under steady-state conditions,the temperature difference between the two ends is $36 ^\circ C$. The temperature difference across the two surfaces of $A$ is .......... $^\circ C$.

Two plates of equal area are placed in contact. Their thicknesses are $2$ and $3$ units respectively. The temperature of the outer surface of the first plate is $-25^{\circ}C$ and the temperature of the outer surface of the second plate is $25^{\circ}C$. Find the temperature of the contact surface if: $(a)$ they are made of the same material,$(b)$ their thermal conductivities are in the ratio $2:3$.

Three identical heat conducting rods are connected in series as shown in the figure. The rods on the sides have thermal conductivity $2K$ while that in the middle has thermal conductivity $K$. The left end of the combination is maintained at temperature $3T$ and the right end at $T$. The rods are thermally insulated from outside. In steady state,the temperature at the left junction is $T_1$ and that at the right junction is $T_2$. The ratio $T_1 / T_2$ is

$A$ large cylindrical rod of length $L$ is made by joining two identical rods of copper and steel of length $(\frac{L}{2})$ each. The rods are completely insulated from the surroundings. If the free end of the copper rod is maintained at $100\,^oC$ and that of the steel rod at $0\,^oC$,then the temperature of the junction is........$^oC$ (Thermal conductivity of copper is $9$ times that of steel).