The thermal conductivity of a wire is $1.7 \ W \ m^{-1} \ K^{-1}$ and that of cement is $2.9 \ W \ m^{-1} \ K^{-1}$. The thickness of the cement insulation is $..... \ cm$. Here,the thickness of the wire is $20 \ cm$.

The thermal conductivity of a material in $CGS$ system is $0.4$. In steady state,the rate of flow of heat is $10 \ cal/sec-cm^2$. Then the thermal gradient will be ....... $^oC/cm$.

Two conducting cylinders of equal length but different radii are connected in series between two heat baths kept at temperatures $T_1=300 \ K$ and $T_2=100 \ K$,as shown in the figure. The radius of the bigger cylinder is twice that of the smaller one and the thermal conductivities of the materials of the smaller and the larger cylinders are $K_1$ and $K_2$ respectively. If the temperature at the junction of the two cylinders in the steady state is $200 \ K$,then $K_1 / K_2 = . . . . . .$

Wires $A$ and $B$ have identical lengths and have circular cross-sections. The radius of $A$ is twice the radius of $B$,$i.e.$,${r_A} = 2{r_B}$. For a given temperature difference between the two ends,both wires conduct heat at the same rate. The relation between the thermal conductivities is given by:

The thermal conductivity of a rod is $2$. What is its thermal resistivity?

Two rods with thermal conductivities $K$ and $3K$ and equal cross-sectional areas are joined as shown in the figure. Their lengths are $1 \ cm$ and $2 \ cm$,respectively. If the temperatures of the two ends of this composite rod are $0^{\circ}C$ and $100^{\circ}C$ (see figure),then the temperature $\phi$ of their interface is: