Two wires of the same length and same cross-sectional area are suspended as shown in the figure. Their Young's moduli are $Y_1$ and $Y_2$. What is their equivalent Young's modulus?

Under the same load,wire $A$ having length $5.0 \, m$ and cross-section $2.5 \times 10^{-5} \, m^2$ stretches uniformly by the same amount as another wire $B$ of length $6.0 \, m$ and a cross-section of $3.0 \times 10^{-5} \, m^2$ stretches. The ratio of the Young's modulus of wire $A$ to that of wire $B$ will be

The dimensional formula for Young's modulus is

What force is required to stretch a wire of cross-sectional area $1 \, cm^2$ to $1.1$ times its original length? (Given: Young's modulus $Y = 2 \times 10^{11} \, N/m^2$)

$A$ steel wire of length $L$ and area of cross-section $A$ is suspended from a rigid support. If $Y$ is the Young's modulus of the material of the wire and $\alpha$ is the coefficient of linear expansion,then the increase in tension when the temperature falls by $t^{\circ} C$ is:

$A$ rod of length $L$ at room temperature and uniform area of cross section $A$ is made of a metal having a coefficient of linear expansion $\alpha /^{\circ}C$. It is observed that an external compressive force $F$,applied on each of its ends,prevents any change in the length of the rod when its temperature rises by $\Delta T \, K$. The Young's modulus $Y$ for this metal is: