$A$ circular coil of radius $30 \ cm$,having $1$ turn and a resistance of ${\pi ^2} \ \Omega$,is placed in a magnetic field of $10^{-2} \ T$. The coil rotates about its diameter with a speed of $200 \ rpm$ in a direction perpendicular to the magnetic field. The value of the induced $AC$ current in the coil will be . . . . . . $mA$.

$A$ conducting circular loop is placed in a uniform magnetic field of $0.04\, T$ with its plane perpendicular to the magnetic field. The radius of the loop starts shrinking at a rate of $2\, mm/s$. The induced $emf$ in the loop when the radius is $2\, cm$ is:

As shown in the figure,a metal rod makes contact with a partial circuit and completes the circuit. The circuit area is perpendicular to a magnetic field with $B = 0.15\, T$. If the resistance of the total circuit is $3\,\Omega$,the force needed to move the rod as indicated with a constant speed of $2\, ms^{-1}$ will be equal to:

$A$ wire having mass $m$ and length $l$ can freely slide on a pair of parallel smooth horizontal rails placed in a vertical magnetic field $B$. The rails are connected by a capacitor of capacitance $C$. The electric resistance of the rails and the wire is zero. If a constant force $F$ acts on the wire as shown in the figure,then the acceleration of the wire is given by:

$A$ circular disc of radius $0.1 \ m$ is rotating about its axis at a frequency of $10 \ rev/s$ in a uniform magnetic field of $0.1 \ T$ directed perpendicular to the disc. Calculate the induced $emf$ between the center and the rim of the disc.

$A$ thin strip $10\, cm$ long is on a $U$ shaped wire of negligible resistance and it is connected to a spring of spring constant $0.5\, N/m$ (see figure). The assembly is kept in a uniform magnetic field of $0.1\, T$. If the strip is pulled from its equilibrium position and released, the number of oscillations it performs before its amplitude decreases by a factor of $e$ is $N$. If the mass of the strip is $50\, g$, its resistance $10\, \Omega$ and air drag is negligible, $N$ will be close to: