A 750, Hz,20, V (rms) source is connected to | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) Given: $f = 750\, Hz$,$V_{rms} = 20\, V$,$R = 100\, \Omega$,$L = 0.1803\, H$,$C = 10\, \mu F = 10 	imes 10^{-6}\, F$,$S = 2\, J/^{\circ}C$,$\Delt

Vedclass · Accepted Answer

$348$

Vedclass · Answer

(C) Given: $f = 750\, Hz$,$V_{rms} = 20\, V$,$R = 100\, \Omega$,$L = 0.1803\, H$,$C = 10\, \mu F = 10 	imes 10^{-6}\, F$,$S = 2\, J/^{\circ}C$,$\Delta T = 10^{\circ}C$.First,calculate the inductive reactance $X_L$ and capacitive reactance $X_C$:$X_L = 2\pi fL = 2 	imes 3.14159 	imes 750 	imes 0.1803 \approx 849.6\, \Omega$.$X_C = \frac{1}{2\pi fC} = \frac{1}{2 	imes 3.14159 	imes 750 	imes 10 	imes 10^{-6}} \approx 21.2\, \Omega$.Calculate the impedance $Z$:$Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{100^2 + (849.6 - 21.2)^2} = \sqrt{10000 + (828.4)^2} \approx \sqrt{10000 + 686246} \approx \sqrt{696246} \approx 834.4\, \Omega$.The power dissipated in the resistor is $P = I_{rms}^2 R = \left(\frac{V_{rms}}{Z}ight)^2 R = \left(\frac{20}{834.4}ight)^2 	imes 100 \approx (0.02397)^2 	imes 100 \approx 0.05746\, W$ (or $J/s$).The heat required is $Q = S \cdot \Delta T = 2\, J/^{\circ}C 	imes 10^{\circ}C = 20\, J$.The time $t$ required is $t = \frac{Q}{P} = \frac{20}{0.05746} \approx 348.07\, s$.Thus,the time is close to $348\, s$.

Similar Questions

An $L-C-R$ series circuit is connected to an $AC$ source of peak voltage $240 \ V$. The phase difference between voltage and current of this circuit is $45^{\circ}$ and the resistance is $100 \ \Omega$. The $rms$ value of current through the circuit is . . . . . . . (in $A$)

The net impedance of the circuit (as shown in the figure) will be $...........\,\Omega$.

$A$ series $LR$ circuit is connected to an ac source of frequency $\omega$ and the inductive reactance is equal to $2R$. $A$ capacitance of capacitive reactance equal to $R$ is added in series with $L$ and $R$. The ratio of the new power factor to the old one is

In a series resonant circuit,the $ac$ voltage across resistance $R$,inductance $L$,and capacitance $C$ are $5\, V$,$10\, V$,and $10\, V$ respectively. The $ac$ voltage applied to the circuit will be.....$V$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module