A 110 , V d.c. heater is used on an a.c. sour | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The heat produced by a heater in a resistance $R$ over time $t$ is given by $H = \frac{V^2}{R} t$.For $d.c.$ voltage,$H_{dc} = \frac{V_{dc}^2}{R}

Vedclass · Accepted Answer

$110$

Vedclass · Answer

(A) The heat produced by a heater in a resistance $R$ over time $t$ is given by $H = \frac{V^2}{R} t$.For $d.c.$ voltage,$H_{dc} = \frac{V_{dc}^2}{R} t$.For $a.c.$ voltage,the heat produced is determined by the $r.m.s.$ value of the voltage,$H_{ac} = \frac{V_{rms}^2}{R} t$.Given that the heat produced is the same in both cases $(H_{ac} = H_{dc})$,we have:$\frac{V_{rms}^2}{R} t = \frac{V_{dc}^2}{R} t$$V_{rms}^2 = V_{dc}^2$$V_{rms} = V_{dc}$Given $V_{dc} = 110 \, V$,therefore $V_{rms} = 110 \, V$.

$A$ $110 \, V$ $d.c.$ heater is used on an $a.c.$ source,such that the heat produced is the same as it produces when connected to $110 \, V$ $d.c.$ in the same time intervals. What would be the $r.m.s.$ value of the alternating voltage?

Similar Questions

Both alternating current and direct current are measured in amperes. But how is the ampere defined for an alternating current?

$A$ group of lamps having a total power rating of $1000 \,W$ is supplied by an $AC$ voltage of $E = 200 \sin(310t + 60^{\circ})$. The $r.m.s.$ value of the current flowing through the circuit is:

If the value of potential in an $AC$ circuit is $10 \ V$,then the peak value of potential is

$A$ sinusoidal voltage produced by an $AC$ generator at any instant $t$ is given by the equation $V = 311 \sin(314t)$. The $rms$ value of voltage and frequency are respectively:

In India,$AC$ voltage becomes zero how many times in $1$ $sec$?

Vedclass Test Series

Exam Paper Generator

Online Exam Module