$A$ block of mass $15 \;kg$ is placed on a long trolley. The coefficient of static friction between the block and the trolley is $0.18$. The trolley accelerates from rest with $0.5 \;m s^{-2}$ for $20 \;s$ and then moves with uniform velocity. Discuss the motion of the block as viewed by
$(a)$ a stationary observer on the ground,
$(b)$ an observer moving with the trolley.

Vedclass pdf generator app on play store
Vedclass iOS app on app store
(A) Mass of the block,$m = 15 \; kg$.
Coefficient of static friction,$\mu = 0.18$.
Acceleration of the trolley,$a = 0.5 \; m s^{-2}$.
According to Newton's second law of motion,the force $F$ required to move the block with the trolley is $F = ma = 15 \times 0.5 = 7.5 \; N$.
The maximum force of static friction available is $f_{max} = \mu mg = 0.18 \times 15 \times 9.8 = 26.46 \; N$ (taking $g = 9.8 \; m s^{-2}$). Even if we take $g = 10 \; m s^{-2}$,$f_{max} = 27 \; N$.
Since the required force $(7.5 \; N)$ is less than the maximum static friction $(27 \; N)$,the block will not slide on the trolley.
$(a)$ For a stationary observer on the ground,the block accelerates along with the trolley at $0.5 \; m s^{-2}$ for the first $20 \; s$ and then moves with a uniform velocity of $v = at = 0.5 \times 20 = 10 \; m s^{-1}$.
$(b)$ For an observer moving with the trolley,the block remains at rest because the frictional force provides the necessary acceleration to keep it stationary relative to the trolley.

Explore More

Similar Questions

$A$ long plank $P$ of mass $5\, kg$ is placed on a smooth floor. On $P$ is placed a block $Q$ of mass $2\, kg$. The coefficient of friction between $P$ and $Q$ is $0.5$. If a horizontal force $15\, N$ is applied to $Q$,as shown,and you may take $g$ as $10\, N/kg$,then which of the following statements is correct?

Two blocks ($P$ and $Q$) with masses $2 \text{ kg}$ and $1.5 \text{ kg}$ respectively are joined by a massless thread. These blocks are mounted on a frictionless pulley which is fixed on the edge of a cube $(S)$, as shown in the figure. Block $P$ is positioned on the top surface which has no friction, and block $Q$ is in contact with the side surface, which has a coefficient of friction $\mu$. The cube $(S)$ moves towards the right with an acceleration of $g/2$, where $g$ is the gravitational acceleration. During this movement, the blocks $P$ and $Q$ remain stationary relative to the cube. The value of $\mu$ is . . . . . . . (Take $g = 10 \text{ m/s}^2$)

$A$ man balances himself in a horizontal position by pushing his hands and feet against two parallel walls. His centre of mass lies midway between the walls. The coefficients of friction at the walls are equal. Which of the following is not correct?

Block $A$ of mass $m$ and block $B$ of mass $M$ are connected by a massless spring over a pulley on a rough plane with coefficient of friction $\mu$. $A$ force $F$ is applied on block $A$ to the left. Find the minimum value of $M$ to move the block $A$ towards the right.

Difficult
View Solution

Place a uniform meter scale horizontally on your extended index fingers with the left one at $0.00 \ cm$ and the right one at $90.00 \ cm$. When you attempt to move both fingers slowly towards the center,initially only the left finger slips with respect to the scale and the right finger does not. After some distance,the left finger stops and the right one starts slipping. Then the right finger stops at a distance $x_R$ from the center $(50.00 \ cm)$ of the scale and the left one starts slipping again. This happens because of the difference in the frictional forces on the two fingers. If the coefficients of static and dynamic friction between the fingers and the scale are $0.40$ and $0.32$,respectively,the value of $x_R$ (in $cm$) is:

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo