$A$ copper wire of length $1.0\, m$ and a steel wire of length $0.5\, m$ having equal cross-sectional areas are joined end to end. The composite wire is stretched by a certain load which stretches the copper wire by $1\, mm$. If the Young's moduli of copper and steel are respectively $1.0 \times 10^{11}\, N/m^2$ and $2.0 \times 10^{11}\, N/m^2$,the total extension of the composite wire is ........ $mm$.

Two wires $A$ and $B$ made of different materials of length $6.0 \ cm$ and $5.4 \ cm$, respectively, and area of cross-sections $3.0 \times 10^{-5} \ m^2$ and $4.5 \times 10^{-5} \ m^2$, respectively, are stretched by the same magnitude under a given load. The ratio of the Young's modulus of $A$ to that of $B$ is $x : 3$. The value of $x$ is . . . . . . . . . . .

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

In a human pyramid in a circus,the entire weight of the balanced group is supported by the legs of a performer who is lying on his back. The combined mass of all the persons performing the act,and the tables,plaques,etc.,involved is $280 \; kg$. The mass of the performer lying on his back at the bottom of the pyramid is $60 \; kg$. Each thighbone (femur) of this performer has a length of $50 \; cm$ and an effective radius of $2.0 \; cm$. Determine the amount by which each thighbone gets compressed under the extra load. (Take Young's modulus for bone $Y = 9.4 \times 10^9 \; N/m^2$)

$A$ wire of length $2L$ is fixed between two walls. When a weight $W = mg$ is applied at its midpoint,it sags by a distance $x$ $(x << L)$. Then $m$ is equal to:

$A$ wooden wheel of radius $R$ is made of two semicircular parts. The two parts are held together by a metal ring of cross-sectional area $S$ and length $L$. $L$ is slightly less than $2\pi R$. To fit the ring on the wheel,the ring is heated by a temperature $\Delta T$. If the coefficient of linear expansion of the metal is $\alpha$ and its Young's modulus is $Y$,the force that one part of the wheel exerts on the other is: