$A$ cylindrical rod with one end in a steam chamber and the other end in ice results in melting of $0.1 \ gm$ of ice per second. If the rod is replaced by another with half the length and double the radius of the first,and if the thermal conductivity of the material of the second rod is $\frac{1}{4}$ that of the first,the rate at which ice melts in $gm/sec$ will be:

Three rods of the same dimensions have thermal conductivities $3k, 2k$ and $k$. They are arranged as shown,with their ends at $100\,^{\circ}C, 50\,^{\circ}C$ and $0\,^{\circ}C$. The temperature of their junction is

$A$ $5 \ cm$ thick ice block is present on the surface of water in a lake. The temperature of the air is $-10^{\circ}C$. How much time will it take to double the thickness of the block? (Given: $L = 80 \ cal/g$,$K_{ice} = 0.004 \ cal/s \cdot cm \cdot ^{\circ}C$,$\rho_{ice} = 0.92 \ g/cm^3$)

$A$ wall consists of two layers $A$ and $B$. The two layers have the same thickness but are made of different materials. The thermal conductivity of $A$ is twice that of $B$. Under steady-state conditions,the temperature difference between the two ends is $36 ^\circ C$. The temperature difference across the two surfaces of $A$ is .......... $^\circ C$.

$A$ deep rectangular pond of surface area $A$,containing water (density $=\rho$,specific heat capacity $=s$),is located in a region where the outside air temperature is at a steady value of $-26^{\circ}C$. The thickness of the frozen ice layer in this pond at a certain instant is $x$. Taking the thermal conductivity of ice as $K$ and its specific latent heat of fusion as $L$,the rate of increase of the thickness of the ice layer at this instant would be given by:

The rate of heat flow through the cross-section of the rod shown in the figure is ($T_2 > T_1$ and the thermal conductivity of the material of the rod is $K$).