$A$ force $F=t$ is applied to block $A$ as shown in the figure. The force is applied at $t=0$ seconds when the system was at rest and the string was just straight without tension. Which of the following graphs shows the friction force between block $B$ and the horizontal surface as a function of time $t$?

$A$ block of mass $m$ is placed on a smooth horizontal surface. $A$ force making an angle $\theta$ with the horizontal starts acting on the block. The magnitude of the force is constant but its direction with the horizontal changes as $\theta = a + bs$,where $a$ and $b$ are constants and $s$ is the distance covered by the block. If $|F| = 2mb$,find the velocity of the block as a function of the angle $\theta$.

Given $m_1 = 4m_2$. The acceleration of $m_1$ is $a$. Find the velocity of $m_2$ at $t = 0.4 \, s$ in $cm/s$.

$A$ block of mass $5\, kg$ is $(i)$ pushed in case $(A)$ and $(ii)$ pulled in case $(B)$,by a force $F = 20\, N$,making an angle of $30^o$ with the horizontal,as shown in the figures. The coefficient of friction between the block and floor is $\mu = 0.2$. The difference between the accelerations of the block,in case $(B)$ and case $(A)$ will be ........ $ms^{-2}$ .$(g = 10\, ms^{-2})$

$A$ block of mass $M$ is placed on a horizontal surface and it is tied with an inextensible string to a block of mass $m$,as shown in the figure. $A$ block of mass $m_0$ is also placed on $M$. If there is no friction between any two surfaces,then:

$A$ cylinder is placed on a rough plank,which in turn is placed on a smooth surface. The plank is pulled with a constant force $F$. Indicate the correct direction of the friction force acting on the cylinder.