$A$ load of $2 \,kg$ produces an extension of $1 \,mm$ in a wire of $3 \,m$ in length and $1 \,mm$ in diameter. The Young's modulus of the wire will be .......... $Nm^{-2}$.

The speed of a transverse wave travelling in a wire of length $50 \text{ cm}$,cross-sectional area $1 \text{ mm}^2$ and mass $5 \text{ g}$ is $80 \text{ ms}^{-1}$. The Young's modulus of the material of the wire is $4 \times 10^{11} \text{ Nm}^{-2}$. The extension in the length of the wire is

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

$A$ metal rod is fixed rigidly at two ends so as to prevent its thermal expansion. If $L$, $\alpha$, and $Y$ denote the length of the rod, the coefficient of linear thermal expansion, and the Young's modulus of its material respectively, then for an increase in temperature of the rod by $\Delta T$, the longitudinal stress developed in the rod is

The ratio of the lengths of two wires of the same material is $1:2$ and the ratio of their radii is $1:\sqrt{2}$. If they are stretched by the same force,what is the ratio of the increase in their lengths?

$A$ steel wire is stretched with a definite load. If the Young's modulus of the wire is $Y$,how can the value of $Y$ be decreased?