A rectangular block of size 10,cm times 8,cm | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The modulus of rigidity $\eta$ is defined as the ratio of shearing stress to shearing strain:$\eta = \frac{F/A}{x/L}$where $F$ is the tangential f

Vedclass · Accepted Answer

Maximum in $Q$ position

Vedclass · Answer

(C) The modulus of rigidity $\eta$ is defined as the ratio of shearing stress to shearing strain:$\eta = \frac{F/A}{x/L}$where $F$ is the tangential force,$A$ is the area of the face on which the force is applied,$x$ is the lateral displacement,and $L$ is the height of the block perpendicular to the force.Rearranging for displacement $x$:$x = \frac{F \cdot L}{\eta \cdot A}$Since $\eta$ and $F$ are constant for all cases,the displacement $x$ is proportional to the ratio of height to area: $x \propto \frac{L}{A}$.Calculating $L/A$ for each case:For position $P$: $L = 5\,cm$,$A = 10 	imes 8 = 80\,cm^2$. So,$L/A = 5/80 = 0.0625\,cm^{-1}$.For position $Q$: $L = 10\,cm$,$A = 8 	imes 5 = 40\,cm^2$. So,$L/A = 10/40 = 0.25\,cm^{-1}$.For position $R$: $L = 8\,cm$,$A = 10 	imes 5 = 50\,cm^2$. So,$L/A = 8/50 = 0.16\,cm^{-1}$.Comparing the values,the ratio $L/A$ is maximum in position $Q$. Therefore,the displacement is maximum in position $Q$.

Similar Questions

What is the modulus of rigidity of a liquid?

The edge of an aluminium cube is $10\; cm$ long. One face of the cube is firmly fixed to a vertical wall. $A$ mass of $100\; kg$ is then attached to the opposite face of the cube. The shear modulus of aluminium is $25\; GPa$. What is the vertical deflection of this face?

$A$ rubber cube of side $5 \ cm$ has one face fixed while a tangential force $1800 \ N$ is applied on its opposite face. If the modulus of rigidity of rubber is $2.4 \times 10^6 \ N \ m^{-2}$,then the lateral displacement of the strained face is $......$ . (in $mm$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module