$A$ rectangular coil $ABCD$ is rotated in a uniform magnetic field with constant angular velocity $\omega$ about one of its diameters as shown in the figure. The induced $emf$ will be maximum when the plane of the coil is

$A$ conducting bar of length $L$ is free to slide on two parallel conducting rails as shown in the figure. Two resistors $R_{1}$ and $R_{2}$ are connected across the ends of the rails. There is a uniform magnetic field $\vec{B}$ pointing into the page. An external agent pulls the bar to the left at a constant speed $v$. The correct statement about the directions of induced currents $I_{1}$ and $I_{2}$ flowing through $R_{1}$ and $R_{2}$ respectively is:

The magnetic induction in the region between the pole faces of an electromagnet is $0.7 \ Wb/m^2$. The induced $e.m.f.$ in a straight conductor $10 \ cm$ long,moving perpendicular to the magnetic field with a velocity of $2 \ m/s$ (where the conductor is also perpendicular to the field and its velocity),is.......$V$.

$A$ conducting rod is moving towards the right with a velocity '$V$' in a uniform magnetic field '$B$'. If the direction of the induced current '$i$' is as shown in the figure, then the direction of '$B$' is:

$A$ wire of length $1 \, m$ is moving at a speed of $2 \, m/s$ perpendicular to a homogeneous magnetic field of $0.5 \, T$. The ends of the wire are joined to a resistance of $6 \, \Omega$. The rate at which work is being done to keep the wire moving at that speed is:

$A$ circular coil of radius $10\; cm$,$500$ turns,and resistance $2\; \Omega$ is placed with its plane perpendicular to the horizontal component of the Earth's magnetic field. It is rotated about its vertical diameter through $180^{\circ}$ in $0.25\; s$. Estimate the magnitudes of the emf and current induced in the coil. The horizontal component of the Earth's magnetic field at the place is $3.0 \times 10^{-5}\; T$.