$A$ screw gauge gives the following readings when used to measure the diameter of a wire:
Main scale reading: $0 \, mm$
Circular scale reading: $52$ divisions
Given that $1 \, mm$ on the main scale corresponds to $100$ divisions on the circular scale. The diameter of the wire from the above data is ...... $cm$.

An experiment is performed to find the refractive index of glass using a travelling microscope. In this experiment,distances are measured by

The smallest division on the main scale of a vernier callipers is $1 \ mm$,and $10$ vernier divisions coincide with $9$ main scale divisions. While measuring the diameter of a sphere,the zero mark of the vernier scale lies between $2.0 \ cm$ and $2.1 \ cm$ of the main scale,and the fifth division of the vernier scale coincides with a main scale division. The diameter of the sphere is:

$A$ student measured the length of a rod and wrote it as $3.50\;cm$. Which instrument did he use to measure it?

The main scale of a vernier caliper reads in millimeters and its vernier scale is divided into $8$ divisions,which coincide with $5$ divisions of the main scale. When the two jaws of the instrument touch each other,the zero of the vernier scale coincides with the zero of the main scale. $A$ rod is placed between the two jaws. It is observed that the zero of the vernier scale lies just to the left of the $36^{th}$ division of the main scale and the fourth division of the vernier scale coincides with a main scale division. The measured value is .......... $cm$.

The vernier calliper used for measurement has a positive zero error of $0.3 \ mm$. While taking measurement for the internal diameter of a vessel,it was observed that the zero of the vernier scale lies between $9.5 \ cm$ and $9.6 \ cm$ of the main scale and the $6^{th}$ division of the vernier scale coincides with a main scale division. If the least count of the vernier calliper is $0.01 \ cm$,the correct value of the diameter will be: (in $cm$)