$A$ shunt of resistance $1\ \Omega$ is connected across a galvanometer of $120\ \Omega$ resistance. $A$ current of $5.5\ A$ flows through the circuit,and the galvanometer shows full-scale deflection. What is the current that would cause full-scale deflection in the galvanometer in the absence of the shunt (in $A$)?

Which of the following statements is correct?

Two moving coil meters,$M_{1}$ and $M_{2}$ have the following particulars:
$R_{1}=10 \,\Omega, \quad N_{1}=30$
$A_{1}=3.6 \times 10^{-3} \,m^{2}, \quad B_{1}=0.25 \,T$
$R_{2}=14 \,\Omega, \quad N_{2}=42$
$A_{2}=1.8 \times 10^{-3} \,m^{2}, \quad B_{2}=0.50 \,T$
(The spring constants are identical for the two meters). Determine the ratio of
$(a)$ current sensitivity and
$(b)$ voltage sensitivity of $M_{2}$ and $M_{1}$.

Moving coil galvanometers $M_{1}$ and $M_{2}$ have resistance, number of turns, area of coil, and magnetic field as follows:
$R_{1}=10 \ \Omega, R_{2}=14 \ \Omega, N_{1}=30, N_{2}=42$
$A_{1}=3.6 \times 10^{-3} \ m^{2}, A_{2}=1.8 \times 10^{-2} \ m^{2}, B_{1}=0.25 \ T, B_{2}=0.50 \ T$
(Spring constants are same for both galvanometers).
The ratio of $(i)$ current sensitivity and (ii) voltage sensitivity for galvanometer ($M_{2}$ to $M_{1}$) is respectively:

An ammeter of resistance $20 \Omega$ gives full scale deflection when $1 \text{ mA}$ current flows through it. What is the maximum current that can be measured by connecting $4$ resistors each of $16 \Omega$ in parallel with the meter (in $\text{ mA}$)?

$A$ galvanometer of resistance $200 \Omega$ is to be converted into an ammeter. The value of shunt resistance which allows $3 \%$ of the main current through the galvanometer is equal to (nearly) (in $\Omega$)