A solid cylinder of mass 2; kg and radius 4; | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Given: Mass $m = 2\; kg$,Radius $R = 4\; cm = 0.04\; m$,Initial angular velocity $\omega_0 = 3\; rpm = \frac{3 	imes 2\pi}{60} = \frac{\pi}{10}\;

Vedclass · Accepted Answer

$2 	imes 10^{-6}\; Nm$

Vedclass · Answer

(A) Given: Mass $m = 2\; kg$,Radius $R = 4\; cm = 0.04\; m$,Initial angular velocity $\omega_0 = 3\; rpm = \frac{3 	imes 2\pi}{60} = \frac{\pi}{10}\; rad/s$.Total angular displacement $	heta = 2\pi 	ext{ revolutions} = 2\pi 	imes 2\pi = 4\pi^2\; rad$.Final angular velocity $\omega = 0$.Using the kinematic equation $\omega^2 = \omega_0^2 - 2\alpha	heta$:$0 = (\frac{\pi}{10})^2 - 2\alpha(4\pi^2)$$8\alpha\pi^2 = \frac{\pi^2}{100} \Rightarrow \alpha = \frac{1}{800}\; rad/s^2$.The moment of inertia of a solid cylinder is $I = \frac{1}{2}mR^2 = \frac{1}{2} 	imes 2 	imes (0.04)^2 = 0.0016\; kg\cdot m^2$.The torque required is $	au = I\alpha = 0.0016 	imes \frac{1}{800} = 16 	imes 10^{-4} 	imes \frac{1}{8} 	imes 10^{-2} = 2 	imes 10^{-6}\; Nm$.

$A$ solid cylinder of mass $2\; kg$ and radius $4\; cm$ is rotating about its axis at the rate of $3\; rpm$. The torque required to stop after $2\pi$ revolutions is

Similar Questions

$A$ constant torque of $1000 \; Nm$ turns a wheel of moment of inertia $200 \; kg \cdot m^2$ about an axis through its centre. The wheel is at rest initially. Its angular velocity after $3 \; s$ is

$A$ disc of radius $0.4 \,m$ and mass $1 \,kg$ rotates about an axis passing through its center and perpendicular to its plane. The angular acceleration is $10 \,rad \,s^{-2}$. The tangential force applied to the rim of the disc is (in $\,N$)

The moment of inertia of a wheel about its vertical axis is $2 \ kg \ m^2$. It is rotating about this axis at a speed of $60 \ rpm$. What torque must be applied to bring the wheel to rest in $1 \ minute$?

$A$ stationary horizontal disc is free to rotate about its axis. When a torque is applied on it,its kinetic energy as a function of $\theta,$ where $\theta$ is the angle by which it has rotated,is given as $K\theta^2.$ If its moment of inertia is $I,$ then the angular acceleration of the disc is

Vedclass Test Series

Exam Paper Generator

Online Exam Module