$A$ steel rod of length $1\,m$ and area of cross-section $1\,cm^2$ is heated from $0\,^{\circ}C$ to $200\,^{\circ}C$ without being allowed to extend or bend. Find the tension produced in the rod $(Y = 2.0 \times 10^{11}\,N/m^2, \alpha = 10^{-5} \,^{\circ}C^{-1})$.

Two wires $A$ and $B$ made of the same material and areas of cross-section in the ratio $1: 2$ are stretched by the same force. If the masses of the wires $A$ and $B$ are in the ratio $2: 3$, then the ratio of the elongations of the wires $A$ and $B$ is

$A$ steel wire is $1 \,m$ long and $1 \,mm^2$ in area of cross-section. If it takes $200 \,N$ to stretch this wire by $1 \,mm$,how much force will be required to stretch a wire of the same material as well as diameter from its normal length of $10 \,m$ to a length of $1002 \,cm$?

There is some change in length when a $33000 \,N$ tensile force is applied on a steel rod of area of cross-section $10^{-3} \,m^2$. The change of temperature required to produce the same elongation, if the steel rod is heated, is (The modulus of elasticity is $3 \times 10^{11} \,N/m^2$ and the coefficient of linear expansion of steel is $1.1 \times 10^{-5} /{ }^{\circ}C$). (in $^{\circ}C$)

$A$ rubber cord $10\, m$ long is suspended vertically. How much does it stretch under its own weight? (Density of rubber is $1500\, kg/m^3$,$Y = 5 \times 10^8\, N/m^2$,$g = 10\, m/s^2$)

The area of cross-section of the rope used to lift a load by a crane is $2.5 \times 10^{-4} \, m^2$. The maximum lifting capacity of the crane is $10$ metric tons. To increase the lifting capacity of the crane to $25$ metric tons,the required area of cross-section of the rope should be $......... \times 10^{-4} \, m^2$ (take $g = 10 \, m/s^2$).