$A$ uniform plank of Young's modulus $Y$ is moved over a smooth horizontal surface by a constant horizontal force $F$. The area of cross-section of the plank is $A$. The compressive strain on the plank in the direction of the force is

The decrease in length of a metal bar of length $L$ and cross-sectional area $A$ when compressed with a load $F$ along its length is (where $Y$ is Young's modulus of the material of the metal bar).

Two wires of equal length and cross-section are suspended as shown. Their Young's moduli are $Y_1$ and $Y_2$ respectively. The equivalent Young's modulus will be

$A$ cylindrical rod made of aluminum has a length of $1 \,m$ and a diameter of $10 \,cm$. The rod is subjected to a tensile force of $100 \,kN$. Calculate the elongation in the rod. (Young's modulus of aluminum $= 70 \,GPa$)

Two wires $A$ and $B$ of the same cross-section are connected end to end. When the same tension is applied to both wires,the elongation in wire $B$ is twice the elongation in wire $A$. If $L_A$ and $L_B$ are the initial lengths of the wires $A$ and $B$ respectively,then (Young's modulus of material of wire $A = 2 \times 10^{11} \ Nm^{-2}$ and Young's modulus of material of wire $B = 1.1 \times 10^{11} \ Nm^{-2}$):

Column $-II$ is related to Column $-I$. Join them appropriately:

Column $-I$	Column $-II$
$(a)$ When temperature is raised,Young's modulus of a body	$(i)$ Zero
$(b)$ Young's modulus for air	$(ii)$ Infinite
	$(iii)$ Decreases
	$(iv)$ Increases