$A$ wire elongates by $l \ mm$ when a load $W$ is hanged from it. If the wire goes over a pulley and two weights $W$ each are hung at the two ends,the elongation of the wire will be (in $mm$)

$A$ fixed volume of iron is drawn into a wire of length $l$. The extension produced in this wire by a constant force $F$ is proportional to

$A$ force $F$ is applied to a wire of length $L$ and radius $r$,resulting in an extension $l$. What will be the extension in a wire of length $2L$ and radius $2r$ when a force $2F$ is applied?

In nature,the failure of structural members usually results from large torque because of twisting or bending rather than due to tensile or compressive strains. This process of structural breakdown is called buckling. In cases of tall cylindrical structures like trees,the torque is caused by their own weight bending the structure,such that the vertical line through the centre of gravity does not fall within the base. The elastic torque caused by this bending about the central axis of the tree is given by $\frac{Y\pi r^4}{4R}$,where $Y$ is the Young's modulus,$r$ is the radius of the trunk,and $R$ is the radius of curvature of the bent surface along the height of the tree containing the centre of gravity (the neutral surface). Estimate the critical height of a tree for a given radius of the trunk.

$A$ wire of length $L$ and radius $r$ is clamped at one end. If its other end is pulled by a force $F$,its length increases by $l$. If the radius of the wire and the applied force both are reduced to half of their original values keeping original length constant,the increase in length will become.

Four identical rods are stretched by the same force. The maximum extension is produced in: