A Zener diode of power rating 1.6,W is to be | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The power rating of the Zener diode is $P = 1.6\,W$ and the breakdown voltage is $V_z = 8\,V$.The maximum current that can flow through the Zener

Vedclass · Accepted Answer

$10$

Vedclass · Answer

(C) The power rating of the Zener diode is $P = 1.6\,W$ and the breakdown voltage is $V_z = 8\,V$.The maximum current that can flow through the Zener diode is $I_{z,max} = \frac{P}{V_z} = \frac{1.6\,W}{8\,V} = 0.2\,A$.For the Zener diode to act as a voltage regulator, the input voltage $V_{in}$ must be greater than the breakdown voltage $V_z$. Here, the input voltage fluctuates between $3\,V$ and $10\,V$. The Zener diode will only regulate when $V_{in} \geq 8\,V$. Therefore, we consider the maximum input voltage $V_{in,max} = 10\,V$ to ensure the diode does not exceed its power rating.The voltage drop across the series resistance $R_s$ at maximum input voltage is $V_{R_s} = V_{in,max} - V_z = 10\,V - 8\,V = 2\,V$.To ensure safe operation, the current through the series resistance $R_s$ must be equal to the maximum current the Zener diode can handle (assuming no load current is connected, which is the worst-case scenario for the diode).Thus, $R_s = \frac{V_{R_s}}{I_{z,max}} = \frac{2\,V}{0.2\,A} = 10\,\Omega$.

Similar Questions

$A$ Zener diode having a breakdown voltage of $5.6 \ V$ is connected in reverse bias with a battery of emf $10 \ V$ and a resistance of $100 \ \Omega$ in series. The current flowing through the Zener diode is (in $mA$)

$A$ Zener diode of breakdown voltage $10 \, V$ is used as a voltage regulator as shown in the figure. The current through the Zener diode is (in $ \, mA$)

An ideal Zener diode with a breakdown voltage of $3 \text{ V}$ is reverse-biased with an input voltage $V_i = 5 \text{ V}$. The magnitude of the voltage difference between points $B$ and $A$ is: (in $\text{ V}$)

In the given circuit diagram,a $5 \,V$ Zener diode along with a series resistance $R$ is connected across a $50 \,V$ power supply. If the maximum Zener current is $90 \,mA$,the minimum value of the resistance $R$ required will be $..... \,\Omega$.

The circuit shown below is working as an $8\; V\; dc$ regulated voltage source. When $12 \; V$ is used as input, the power dissipated (in $mW$) in each diode is (considering both zener diodes are identical).

Vedclass Test Series

Exam Paper Generator

Online Exam Module