Alternating current of peak value $(\frac{2}{\pi}) \ A$ flows through the primary coil of a transformer. The coefficient of mutual inductance between the primary and secondary coil is $1 \ H$. The peak e.m.f. induced in the secondary coil is (Frequency of a.c. $= 50 \ Hz$) (in $V$)

$A$ small circular loop of wire of radius $a$ is located at the centre of a much larger circular wire loop of radius $b$. The two loops are in the same plane. The outer loop of radius $b$ carries an alternating current $I = I_0 \cos (\omega t)$. The emf induced in the smaller inner loop is nearly

The coefficient of mutual induction is $2 \ H$ and the induced e.m.f. across the secondary coil is $2 \ kV$. The current in the primary coil is reduced from $6 \ A$ to $3 \ A$. The time required for the change of current is:

Consider a conducting wire of length $L$ bent in the form of a circle of radius $R$ and another conductor of length $a$ $(a \ll R)$ is bent in the form of a square. The two loops are then placed in the same plane such that the square loop is exactly at the centre of the circular loop. What will be the mutual inductance between the two loops?

The mutual inductance of a system of two coils does not depend on . . . . . . .

Two concentric circular coils, one of small radius $r_1$ and the other of large radius $r_2$, such that $r_1 \ll r_2$, are placed co-axially with their centres coinciding. The mutual inductance $M$ of the arrangement is proportional to . . . . . . .