An 80 text{ W} lamp is connected to the secon | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) For an ideal transformer, the power input in the primary coil is equal to the power output in the secondary coil.Given: Power output $(P_{out})$ =

Vedclass · Accepted Answer

$0.36$

Vedclass · Answer

(C) For an ideal transformer, the power input in the primary coil is equal to the power output in the secondary coil.Given: Power output $(P_{out})$ = $80 	ext{ W}$, Primary voltage $(V_p)$ = $220 	ext{ V}$.Since the transformer is ideal, $P_{in} = P_{out} = 80 	ext{ W}$.The power input is given by the formula $P_{in} = V_p 	imes I_p$, where $I_p$ is the current in the primary winding.Therefore, $I_p = \frac{P_{in}}{V_p} = \frac{80 	ext{ W}}{220 	ext{ V}}$.$I_p = \frac{8}{22} 	ext{ A} \approx 0.3636 	ext{ A}$.Rounding to two decimal places, the current in the primary winding is approximately $0.36 	ext{ A}$.

An $80 \text{ W}$ lamp is connected to the secondary of a step-down transformer, where the primary is connected to an $AC$ mains of $220 \text{ V}$. Assuming the transformer to be ideal, the current in the primary winding is nearly: (in $\text{ A}$)

Similar Questions

An ideal transformer has a turns ratio of $10$. When the primary is connected to $220 \ V$,$50 \ Hz$ as a source,the power output is

The coils of a step-down transformer have $500$ and $5000$ turns. In the primary coil, an $AC$ current of $4 \,A$ at $2200 \,V$ is sent. The value of the current and potential difference in the secondary coil is:

In an ideal step-up transformer,if the input voltage and input power are $V_1$ and $P_1$ respectively,and the output voltage and output power are $V_2$ and $P_2$ respectively,then

Large transformers,when used for some time,become hot and are cooled by circulating oil. The heating of a transformer is due to:

The primary and secondary coils of a transformer have $50$ and $1500$ turns respectively. If the magnetic flux $\phi = \phi_0 + 4t$,where $\phi$ is in webers,$t$ is time in seconds and $\phi_0$ is a constant,the output voltage across the secondary coil is......$V$

Vedclass Test Series

Exam Paper Generator

Online Exam Module