An electric bulb and a capacitor are connecte | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The impedance $Z$ of an $RC$ series circuit is given by $Z = \sqrt{R^2 + X_C^2} = \sqrt{R^2 + (\frac{1}{\omega C})^2}$.The current $I$ in the circ

Vedclass · Accepted Answer

Increases

Vedclass · Answer

(A) The impedance $Z$ of an $RC$ series circuit is given by $Z = \sqrt{R^2 + X_C^2} = \sqrt{R^2 + (\frac{1}{\omega C})^2}$.The current $I$ in the circuit is given by $I = \frac{V}{Z}$.The brightness of the bulb depends on the power dissipated,which is $P = I^2 R$.As the frequency $f$ of the $AC$ source increases,the angular frequency $\omega = 2\pi f$ also increases.Since $X_C = \frac{1}{\omega C}$,an increase in $\omega$ leads to a decrease in the capacitive reactance $X_C$.As $X_C$ decreases,the total impedance $Z = \sqrt{R^2 + X_C^2}$ decreases.Since $I = \frac{V}{Z}$,a decrease in $Z$ leads to an increase in the current $I$ flowing through the circuit.As the current $I$ increases,the power dissipated $P = I^2 R$ increases,and therefore the brightness of the bulb increases.

An electric bulb and a capacitor are connected in series with an $AC$ source. On increasing the frequency of the source,the brightness of the bulb

Similar Questions

$A$ coil of $0.01 \, H$ inductance and $1 \, \Omega$ resistance is connected to a $200 \, V, 50 \, Hz$ $AC$ supply. Find the impedance of the circuit and the time lag between the maximum alternating voltage and current.

$A$ resistor and a capacitor are connected in series with an $AC$ source. If the potential drop across the capacitor is $5 \,V$ and that across the resistor is $12 \,V$, then the applied voltage is (in $\,V$)

$A$ capacitor of capacitance $100 \mu F$ and a coil of resistance $20 \Omega$ and inductance $12.5 mH$ are connected in series with a $220 V, \frac{200}{\pi} Hz$ $AC$ source. The maximum value of instantaneous current in the circuit is (in $A$)

$A$ $100 \;\mu\,F$ capacitor in series with a $40\; \Omega$ resistance is connected to a $110\; V, 60\; Hz$ supply.
$(a)$ What is the maximum current in the circuit?
$(b)$ What is the time lag between the current maximum and the voltage maximum?

$A$ sinusoidal voltage $V(t) = 210 \sin(3000t) \text{ V}$ is applied to a series $LCR$ circuit in which $L = 10 \text{ mH}$,$C = 25 \mu\text{F}$,and $R = 100 \Omega$. The phase difference $(\Phi)$ between the applied voltage and resultant current will be

Vedclass Test Series

Exam Paper Generator

Online Exam Module