An emf $E = 6 \cos(6000t) \ V$ is applied to an $L-R$ circuit of inductance $L = 4 \ mH$ and resistance $R = 7 \ \Omega$. The amplitude of the current in the circuit is . . . . . . (in $A$)

An alternating emf given by the equation $E = 200 \sin(50 \pi t)$ (where $E$ is in volts and $t$ is in seconds) is applied across a series combination of an inductor and a resistor having inductive reactance $X_L = 40 \ \Omega$ and resistance $R = 30 \ \Omega$ respectively. At time $t = 1 \ s$,the power dissipated by the resistor is close to $(\cos 53^{\circ} = 0.6)$. (in $W$)

In an $AC$ circuit,a resistance of $R \, \Omega$ is connected in series with an inductance $L$. If the phase angle between voltage and current is $45^o$,the value of inductive reactance will be:

In an $ac$ circuit,the reactance of a coil is $\sqrt{3}$ times its resistance. The phase difference between the voltage across the coil and the current through the coil will be:

$A$ long solenoid connected to a $12\,V\, DC$ source passes a steady current of $2\,A.$ When the solenoid is connected to a source of $12\,V\, RMS$ at $50\,Hz,$ the current flowing is $1\,A\, RMS.$ Then the inductance of the solenoid is ....$mH$.

$A$ coil of $200 \, \Omega$ resistance and $1.0 \, H$ inductance is connected to an $ac$ source of frequency $200/2\pi \, Hz.$ The phase angle between potential and current will be.....$^o$