Assertion: Voltmeter is connected in parallel with the circuit.
Reason: Resistance of a voltmeter is very large.

Why should the resistance of an ammeter be as low as possible?

$A$ voltmeter having a resistance of $998 \, \Omega$ is connected to a cell of $e.m.f.$ $2 \, V$ and internal resistance $2 \, \Omega$. The error in the measurement of $e.m.f.$ will be

Two identical moving coil galvanometers have $10 \Omega$ resistance and full scale deflection at $2 \mu A$ current. One of them is converted into a voltmeter of $100 \text{ mV}$ full scale reading and the other into an ammeter of $1 \text{ mA}$ full scale current using appropriate resistors. These are then used to measure the voltage and current in the Ohm's law experiment with $R = 1000 \Omega$ resistor by using an ideal cell. Which of the following statement$(s)$ is/are correct?
$(1)$ The measured value of $R$ will be $980.2 \Omega$.
$(2)$ The resistance of the voltmeter will be $50 \text{ k} \Omega$.
$(3)$ The resistance of the ammeter will be $0.02 \Omega$ (rounded off to the $2^{\text{nd}}$ decimal place).
$(4)$ If the ideal cell is replaced by a cell having internal resistance of $5 \Omega$,then the measured value of $R$ will be more than $1000 \Omega$.

$A$ galvanometer coil has a resistance $80 \Omega$ and current for full-scale deflection is $10 \text{ mA}$. $A$ resistance of $920 \Omega$ is connected in series with the galvanometer to make a voltmeter. If the least count of the voltmeter is $0.2 \text{ V}$,the number of divisions on the scale is:

$A$ galvanometer having a coil resistance of $100 \ \Omega$ gives a full-scale deflection when a current of $1 \ mA$ is passed through it. The value of the shunt resistance,which can convert this galvanometer into an ammeter giving a full-scale deflection for a current of $10 \ A$,is: ...... $\Omega$