Can a system be heated and its temperature remain constant?

$A$ $500 \Omega$ resistor connected to an external battery is placed inside a thermally insulated cylinder fitted with a frictionless piston. The cylinder contains an ideal gas. $A$ current $i$ of $200 \text{ mA}$ flows through the resistor as shown in the figure. The mass of the piston is $10 \text{ kg}$. Assuming $g = 10 \text{ m/s}^2$, the speed at which the piston will move upward, due to heat dissipated by the resistor, so that the temperature of the gas remains unchanged is (in $\text{ cm/s}$)

When an ideal gas in a cylinder was compressed isothermally by a piston,the work done on the gas was found to be $1.5 \times 10^4 \ J$. During this process,about:

The internal energy of an ideal gas increases during an isothermal process when the gas is

One mole of an ideal gas expands from an initial volume of $10 \; L$ to a final volume of $20 \; L$ at a constant temperature of $300 \; K$. Calculate the work done by the gas in $J$. $(R = 8.31 \; J/mol \cdot K)$ (in $; J$)

Two identical vessels $A$ and $B$ with frictionless pistons contain the same ideal gas at the same temperature and the same volume $V$. The masses of gas in $A$ and $B$ are $m_A$ and $m_B$, respectively. The gases are allowed to expand isothermally to the same final volume $2V$. The changes in pressures of the gas in $A$ and $B$ are found to be $\Delta P$ and $1.5 \Delta P$, respectively. Then