Consider a compound slab consisting of two different materials having equal thickness and thermal conductivities $K$ and $2K$ respectively. The equivalent thermal conductivity of the slab is

Two rods of same length and material transfer a given amount of heat in $12 \, s$ when they are joined end to end. But when they are joined lengthwise (parallel),they will transfer the same amount of heat under the same conditions in .......... $s$.

$A$ composite slab is made of two different materials of equal thickness,having thermal conductivities $K$ and $2K$ respectively. The equivalent thermal conductivity of the slab is ........

The rate of flow of heat through a copper rod with a temperature difference of $28^{\circ} C$ is $1400 \ cal s^{-1}$. The thermal resistance of the copper rod will be:

Three rods made of the same material and having the same cross-section have been joined as shown in the figure. Each rod is of the same length. The left and right ends are kept at $0^{\circ}C$ and $90^{\circ}C$ respectively. The temperature of the junction of the three rods will be ...... $^{\circ}C$.

Two conducting rods $A$ and $B$ of same length and cross-sectional area are connected $(i)$ In series $(ii)$ In parallel as shown. In both combinations,a temperature difference of $100^{\circ}C$ is maintained. If the thermal conductivity of $A$ is $3K$ and that of $B$ is $K$,then the ratio of heat current flowing in the parallel combination to that flowing in the series combination is: