Consider a glass slab which is silvered at one side and the other side is transparent. The refractive index of the glass slab is $1.5$. If a ray of light is incident at an angle of $45^{\circ}$ on the transparent side,then the deviation of the ray of light from its initial path,when it comes out of the slab,is (in $^{\circ}$)

The flat face of a plano-convex lens of focal length $10 \,cm$ is silvered. $A$ point source placed $30 \,cm$ in front of the curved surface will produce a

Two identical symmetric double convex lenses of focal length $f$ are cut into two equal parts $L_1, L_2$ by the $AB$ plane and $L_3, L_4$ by the $XY$ plane as shown in the figure respectively. The ratio of the focal lengths of lenses $L_1$ and $L_3$ is

$A$ convex lens has a focal length $f$. It is cut into two parts along the dotted line as shown in the figure. The focal length of each part will be

The figure shows an equiconvex lens (of refractive index $1.50$) in contact with a liquid layer on top of a plane mirror. $A$ small needle with its tip on the principal axis is moved along the axis until its inverted image is found at the position of the needle. The distance of the needle from the lens is measured to be $45.0 \; cm$. The liquid is removed and the experiment is repeated. The new distance is measured to be $30.0 \; cm$. What is the refractive index of the liquid?

The two surfaces of a biconvex lens have the same radii of curvature. This lens is made of glass of refractive index $1.5$ and has a focal length $10 \ cm$ in air. The lens is cut into two equal halves along a plane perpendicular to its principal axis to yield two plano-convex lenses. The two pieces are glued such that the convex surfaces touch each other. If this combination lens is immersed in water (refractive index $= 4/3$), its focal length (in $cm$) is: