Consider a rod of length $1.0 \ m$ with a cross-sectional area of $0.50 \ cm^2$. The rod supports a $500 \ kg$ platform that hangs attached to the rod's lower end. What is the elongation of the rod under the stress, ignoring the weight of the rod (in $mm$)? Consider Young's modulus to be $10^{11} \ Pa$ and $g = 10 \ m \ s^{-2}$.

$A$ force $F$ is applied to a wire of length $L$ and radius $r$,resulting in an extension $l$. What will be the extension in a wire of length $2L$ and radius $2r$ when a force $2F$ is applied?

Stress required in a wire to produce $0.1\%$ strain is $4 \times 10^8 \, N/m^2$. Its Young's modulus is $Y_1$. If stress required in another wire to produce $0.3\%$ strain is $6 \times 10^8 \, N/m^2$,and its Young's modulus is $Y_2$,which relation is correct?

$A$ horizontal steel railroad track has a length of $100 \, m$ when the temperature is $25^{\circ} C$. The track is constrained from expanding or bending. The stress on the track on a hot summer day,when the temperature is $40^{\circ} C$,is ............. $\times 10^7 \, Pa$. (Note: The linear coefficient of thermal expansion for steel is $1.1 \times 10^{-5} /^{\circ} C$ and the Young's modulus of steel is $2 \times 10^{11} \, Pa$.)

Write the equation of bending in a rod. Write the unit of bending and its dimensional formula.

$A$ copper wire of length $2.2 \; m$ and a steel wire of length $1.6 \; m$,both of diameter $3.0 \; mm$,are connected end to end. When stretched by a load,the net elongation is found to be $0.70 \; mm$. Obtain the load applied in $N$.