Consider the titration of $NaOH$ solution versus $1.25\, M$ oxalic acid solution. At the end point,the following burette readings were obtained:
$(i)$ $4.5\, mL$ $\quad (ii)$ $4.5\, mL$ $\quad (iii)$ $4.4\, mL$
$(iv)$ $4.4\, mL$ $\quad (v)$ $4.4\, mL$
If the volume of oxalic acid taken was $10.0\, mL$,then the molarity of the $NaOH$ solution is .... $M$ (Rounded-off to the nearest integer).

Can titrations with $KMnO_4$ be performed in the presence of $HCl$? Why?

Given below are two statements:
Statement $I$: In the oxalic acid vs $KMnO_4$ (in the presence of dil. $H_2SO_4$) titration,the solution needs to be heated initially to $60^{\circ}C$,but no heating is required in Ferrous Ammonium Sulphate $(\text{FAS})$ vs $KMnO_4$ titration (in the presence of dil. $H_2SO_4$).
Statement $II$: In oxalic acid vs $KMnO_4$ titration,the initial formation of $MnSO_4$ takes place at high temperature,which then acts as a catalyst for the further reaction. In the case of $\text{FAS}$ vs $KMnO_4$,heating oxidizes $Fe^{2+}$ into $Fe^{3+}$ by oxygen of air and error may be introduced in the experiment.
In the light of the above statements,choose the correct answer from the options given below:

$25 \ mL$ of the given $HCl$ solution requires $30 \ mL$ of $0.1 \ M$ sodium carbonate solution. What is the volume of this $HCl$ solution required to titrate $30 \ mL$ of $0.2 \ M$ aqueous $NaOH$ solution? .............. $mL$

The strength of an aqueous $NaOH$ solution is most accurately determined by titrating it against a standard solution of oxalic acid. (Note: consider that an appropriate indicator is used)

In a titration experiment,$10 \, mL$ of an $FeCl_{2}$ solution consumed $25 \, mL$ of a standard $K_{2}Cr_{2}O_{7}$ solution to reach the equivalence point. The standard $K_{2}Cr_{2}O_{7}$ solution is prepared by dissolving $1.225 \, g$ of $K_{2}Cr_{2}O_{7}$ in $250 \, mL$ water. The concentration of the $FeCl_{2}$ solution is closest to $..... \, N$
[Given : molecular weight of $K_{2}Cr_{2}O_{7} = 294 \, g \, mol^{-1}$]