For the circuit shown in the adjoining figure | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) In a bridge rectifier circuit,the $AC$ input is applied across two opposite junctions of the diode bridge,while the $DC$ output is taken across th

Vedclass · Accepted Answer

$B$ and $D$ and $A$ and $C$

Vedclass · Answer

(A) In a bridge rectifier circuit,the $AC$ input is applied across two opposite junctions of the diode bridge,while the $DC$ output is taken across the other two opposite junctions.Looking at the provided figure,the diodes are arranged such that they point towards $A$ and $D$ from $B$ and $C$ respectively. To achieve full-wave rectification,the $AC$ input must be connected across the junctions $B$ and $D$. When the input is applied at $B$ and $D$,the $DC$ output is obtained across the junctions $A$ and $C$. During the positive half-cycle of the $AC$ input,two diodes conduct to provide current in one direction through the load,and during the negative half-cycle,the other two diodes conduct to provide current in the same direction through the load. Thus,the correct configuration is $AC$ input across $B$ and $D$,and $DC$ output across $A$ and $C$.

For the circuit shown in the adjoining figure,to act as a full-wave rectifier,the $AC$ input should be connected across $....$ and $....$ and the $DC$ output would appear across $....$ and $....$.

Similar Questions

Which is the correct diagram of a half-wave rectifier?

$A$ half-wave rectifier is used to supply $100 \, V$ $dc$ to a load of $800 \, \Omega$. The diode resistance is $200 \, \Omega$. The $ac$ voltage required is :.......$V$

If an alternating voltage is applied across a $p-n$ junction diode in series with a load,then:

$A$ half-wave rectifier provides a load current of $1 \ k\Omega$. The input voltage is $220 \ V$. Neglecting the diode resistance,the value of the ripple voltage $(rms)$ is .... $V$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module