If Young's modulus for a material is zero,then the state of material should be

The pressure that has to be applied to the ends of a steel wire of length $10 \ cm$ to keep its length constant when its temperature is raised by $100 \ ^\circ C$ is: (For steel,Young's modulus $Y = 2 \times 10^{11} \ N/m^2$ and coefficient of thermal expansion $\alpha = 1.1 \times 10^{-5} \ K^{-1}$)

An Indian rubber cord $L$ metre long and area of cross-section $A$ $m^2$ is suspended vertically. The density of rubber is $D$ $kg/m^3$ and Young's modulus of rubber is $E$ $N/m^2$. If the wire extends by $l$ metre under its own weight,then the extension $l$ is:

$A$ rod of length $L$ at room temperature and uniform area of cross section $A$ is made of a metal having a coefficient of linear expansion $\alpha /^{\circ}C$. It is observed that an external compressive force $F$,applied on each of its ends,prevents any change in the length of the rod when its temperature rises by $\Delta T \, K$. The Young's modulus $Y$ for this metal is:

The ratio of the lengths of two wires of the same material is $1:2$ and the ratio of their radii is $1:\sqrt{2}$. If they are stretched by the same force,what is the ratio of the increase in their lengths?

$A$ one metre steel wire of negligible mass and area of cross-section $0.01 \,cm^2$ is kept on a smooth horizontal table with one end fixed. $A$ ball of mass $1 \,kg$ is attached to the other end. The ball and the wire are rotating with an angular velocity of $\omega$. If the elongation of the wire is $2 \,mm$, then $\omega$ is (Young's modulus of steel $= 2 \times 10^{11} \,N/m^2$)