In a potentiometer, the null point is received at the $7^{th}$ wire. If we now want to shift the null point to the $9^{th}$ wire, what should we do?

$A$ potentiometer circuit is set up as shown. The potential gradient across the potentiometer wire is $k \, V/cm$ and the ammeter present in the circuit reads $1.0 \, A$ when the two-way key is switched off. The balance points,when the key between the terminals $(i)$ $1$ and $2$ and $(ii)$ $1$ and $3$ is plugged in,are found to be at lengths $l_1$ and $l_2$ respectively. The magnitudes of the resistors $R$ and $X$ in ohms are equal to:

In an experiment to measure the internal resistance of a cell by a potentiometer,it is found that the balance point is at a length of $2\,m$ when the cell is shunted by a $5\,\Omega$ resistance; and is at a length of $3\,m$ when the cell is shunted by a $10\,\Omega$ resistance. The internal resistance of the cell is,then ................ $\Omega$.

In the given circuit of a potentiometer,the potential difference $E$ across $AB$ ($10\, m$ length) is larger than $E_{1}$ and $E_{2}$ as well. For key $K_{1}$ (closed),the jockey is adjusted to touch the wire at point $J_{1}$ so that there is no deflection in the galvanometer. Now,the first battery $(E_{1})$ is replaced by the second battery $(E_{2})$ for working by making $K_{1}$ open and $K_{2}$ closed. The galvanometer then gives null deflection at $J_{2}$. The value of $\frac{E_{1}}{E_{2}}$ is $\frac{a}{b}$,where $a = \dots$ (Refer to the image for balancing lengths $l_{1}$ and $l_{2}$ from point $A$).

In a potentiometer, the area of cross-section of the wire is $4 \, cm^2$, the current flowing in the circuit is $1 \, A$ and the potential gradient is $7.5 \, V/m$, then the resistivity of the potentiometer wire is

In a potentiometer experiment,cells of e.m.f. $E_1$ and $E_2$ are connected in series $(E_1 > E_2)$ and the balancing length is $80 \ cm$. If the polarity of $E_2$ is reversed,the balancing length becomes $20 \ cm$. The ratio $E_1 / E_2$ is: