In a screw gauge,the fifth division of the circular scale coincides with the reference line when the ratchet is closed. There are $50$ divisions on the circular scale,and the main scale moves by $0.5 \, mm$ on a complete rotation. For a particular observation,the reading on the main scale is $5 \, mm$ and the $20^{th}$ division of the circular scale coincides with the reference line. Calculate the true reading in $mm$.

$A$ screw gauge has some zero error but its value is unknown. We have two identical rods. When the first rod is inserted in the screw gauge,the state of the instrument is shown by diagram $(I)$. When both the rods are inserted together in series,the state is shown by diagram $(II)$. What is the zero error of the instrument in $mm$? Given: $1 \, M.S.D. = 100 \, C.S.D. = 1 \, mm$.

$A$ steel wire of diameter $0.5 \text{ mm}$ and Young's modulus $2 \times 10^{11} \text{ N m}^{-2}$ carries a load of mass $M$. The length of the wire with the load is $1.0 \text{ m}$. $A$ vernier scale with $10$ divisions is attached to the end of this wire. Next to the steel wire is a reference wire to which a main scale,of least count $1.0 \text{ mm}$,is attached. The $10$ divisions of the vernier scale correspond to $9$ divisions of the main scale. Initially,the zero of vernier scale coincides with the zero of main scale. If the load on the steel wire is increased by $1.2 \text{ kg}$,the vernier scale division which coincides with a main scale division is. . . . Take $g = 10 \text{ m s}^{-2}$ and $\pi = 3.2$.

The pitch of the screw gauge is $1\, mm$ and there are $100$ divisions on the circular scale. When nothing is put in between the jaws,the zero of the circular scale lies $8$ divisions below the reference line. When a wire is placed between the jaws,the first linear scale division is clearly visible while $72^{nd}$ division on the circular scale coincides with the reference line. The radius of the wire is.........$mm$

$A$ screw gauge has a pitch of $1.5\; mm$ and there is no zero error. The linear scale has markings at $MSD = 1\; mm$ and there are $100$ equal divisions on the circular scale. When the diameter of a sphere is measured with this instrument,the $2\; mm$ mark is visible on the linear scale,but the $3\; mm$ mark is not visible. The $76^{th}$ division of the circular scale is in line with the linear scale. What is the diameter of the sphere in $mm$?

The main scale division of a vernier caliper is $1 \ mm$. The vernier scale divisions are in an arithmetic progression $(A.P.)$; the $1^{st}$ division is $0.95 \ mm$, the $2^{nd}$ division is $0.90 \ mm$, and so on. When an object is placed between the jaws of the vernier caliper, the zero of the vernier scale lies between $3.1 \ cm$ and $3.2 \ cm$, and the $4^{th}$ division of the vernier scale coincides with a main scale division. The reading of the vernier caliper is .......... $cm$.