In a series $L-C-R$ circuit,the current in the circuit is $11 \, A$ when the applied voltage is $220 \, V$. The voltage across the capacitor is $200 \, V$. If the value of the resistor is $20 \, \Omega$,then the voltage across the unknown inductor is.......$V$

An e.m.f. $E = E_{0} \sin \omega t$ is applied to a circuit containing $L$ and $R$ in series. If $X_{L} = R$,then the power dissipated in the circuit is

In an $AC$ circuit,a resistance of $R \, \Omega$ is connected in series with an inductance $L$. If the phase angle between voltage and current is $45^o$,the value of inductive reactance will be:

In a series $LCR$ circuit, the $rms$ voltage across the resistor and the capacitor are $30 \ V$ and $90 \ V$ respectively. If the applied voltage is $V = 50 \sqrt{2} \sin \omega t$, then the peak voltage across the inductor is

$A$ coil of inductance $0.50 \; H$ and resistance $100 \; \Omega$ is connected to a $240 \; V, 50 \; Hz$ $AC$ supply.
$(a)$ What is the maximum current in the coil?
$(b)$ What is the time lag between the voltage maximum and the current maximum?

$A$ light bulb and an open coil inductor are connected to an $AC$ source through a key as shown in the figure. The switch is closed and after some time,an iron rod is inserted into the interior of the inductor. Does the glow of the light bulb $(a)$ increase,$(b)$ decrease,or $(c)$ remain unchanged? Give your answer with reasons.