In a triode amplifier,mu = 25,r_p = 40 text{ | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The voltage gain $A_v$ of a triode amplifier is given by the formula: $A_v = \frac{\mu R_L}{r_p + R_L} = \frac{\mu}{1 + \frac{r_p}{R_L}}$.Given: $

Vedclass · Accepted Answer

$2.5$

Vedclass · Answer

(C) The voltage gain $A_v$ of a triode amplifier is given by the formula: $A_v = \frac{\mu R_L}{r_p + R_L} = \frac{\mu}{1 + \frac{r_p}{R_L}}$.Given: $\mu = 25$,$r_p = 40 	ext{ k}\Omega$,$R_L = 10 	ext{ k}\Omega$,and $V_{	ext{in}} = 0.5 	ext{ V}$.Substituting the values into the gain formula:$A_v = \frac{25}{1 + \frac{40}{10}} = \frac{25}{1 + 4} = \frac{25}{5} = 5$.Since voltage gain $A_v = \frac{V_{	ext{out}}}{V_{	ext{in}}}$,we have $V_{	ext{out}} = A_v 	imes V_{	ext{in}}$.$V_{	ext{out}} = 5 	imes 0.5 	ext{ V} = 2.5 	ext{ V}$.

In a triode amplifier,$\mu = 25$,$r_p = 40 \text{ k}\Omega$,and load resistance $R_L = 10 \text{ k}\Omega$. If the input signal voltage is $0.5 \text{ V}$,then the output signal voltage will be.....$\text{V}$.

Similar Questions

In an amplifier,the load resistance ${R_L}$ is equal to the plate resistance ${r_p}$. The voltage amplification is equal to:

If ${R_p} = 7 \text{ k}\Omega$ and ${g_m} = 2.5 \text{ millimho}$, then on increasing the plate voltage by $50 \text{ V}$, how much must the grid voltage be changed so that the plate current remains the same? (in $V$)

In the figure,four plate characteristics of a triode at different grid voltages are shown. The difference between successive grid voltages is $1 \ V$. Which curve will have the maximum grid voltage and what is its value?

What is the effect of $SCR$ (Space Charge Region) in a vacuum tube?

The slope of the anode characteristic and the mutual characteristic of a triode are $0.02 \text{ mA/V}$ and $1 \text{ mA/V}$ respectively. The amplification factor of the valve is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module