In a vernier callipers,$10$ divisions of vernier scale coincide with $9$ divisions of main scale,the least count of which is $0.1\,cm$. If in the measurement of inner diameter of a cylinder,the zero of the vernier scale lies between $1.3\,cm$ and $1.4\,cm$ of the main scale and the $2^{nd}$ division of the vernier scale coincides with a main scale division,then the diameter will be .......... $cm$.

The least count of the main scale of a vernier callipers is $1\, mm$. Its vernier scale is divided into $10$ divisions and coincides with $9$ divisions of the main scale. When jaws are touching each other,the $7^{th}$ division of the vernier scale coincides with a division of the main scale and the zero of the vernier scale lies to the right side of the zero of the main scale. When this vernier is used to measure the length of a cylinder,the zero of the vernier scale is between $3.1\, cm$ and $3.2\, cm$ and the $4^{th}$ $VSD$ coincides with a main scale division. The length of the cylinder is $.....\, cm$. ($VSD$ is vernier scale division)

In a vernier calliper,when both jaws touch each other,the zero of the vernier scale shifts towards the left and its $4^{\text{th}}$ division coincides exactly with a certain division on the main scale. If $50$ vernier scale divisions $(VSD)$ are equal to $49$ main scale divisions $(MSD)$ and the zero error in the instrument is $0.04 \text{ mm}$,then how many main scale divisions are there in $1 \text{ cm}$?

In an experiment to find out the diameter of a wire using a screw gauge,the following observations were noted:
$(A)$ Screw moves $0.5 \ mm$ on the main scale in one complete rotation.
$(B)$ Total divisions on the circular scale $= 50$.
$(C)$ Main scale reading is $2.5 \ mm$.
$(D)$ $45^{\text{th}}$ division of the circular scale is in the reference line.
$(E)$ Instrument has $0.03 \ mm$ negative zero error.
Then the diameter of the wire is: (in $mm$)

The least count of a screw gauge is $0.01 \ mm$. If the pitch is increased by $75\%$ and the number of divisions on the circular scale is reduced by $50\%$,the new least count will be . . . . . . $\times 10^{-3} \ mm$.

In a screw gauge, there are $100$ divisions on the circular scale and the main scale moves by $0.5\,mm$ on a complete rotation of the circular scale. The zero of the circular scale lies $6$ divisions below the reference line when two studs are brought in contact with each other. When a wire is placed between the studs, $4$ main scale divisions are clearly visible while the $46^{\text{th}}$ division of the circular scale coincides with the reference line. The diameter of the wire is $...........\times 10^{-2}\,mm$.