In an experiment,the input characteristics ar | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) In the input characteristics of a common-emitter $(CE)$ transistor,the base current $I_B$ is plotted against the base-emitter voltage $V_{BE}$ for

Vedclass · Accepted Answer

$V_{CE_1} > V_{CE_2}$

Vedclass · Answer

(A) In the input characteristics of a common-emitter $(CE)$ transistor,the base current $I_B$ is plotted against the base-emitter voltage $V_{BE}$ for a constant collector-emitter voltage $V_{CE}$.As the collector-emitter voltage $V_{CE}$ increases,the depletion region width at the collector-base junction increases,which reduces the effective base width. This leads to a decrease in the recombination of charge carriers in the base region,causing the base current $I_B$ to decrease for a fixed $V_{BE}$.Therefore,for a given $V_{BE}$,a higher $V_{CE}$ results in a lower $I_B$.Looking at the graph,the curve for $V_{CE_2}$ is shifted to the left (higher $I_B$ for the same $V_{BE}$) compared to the curve for $V_{CE_1}$.This implies that $V_{CE_2}$ must be smaller than $V_{CE_1}$,i.e.,$V_{CE_2}  V_{CE_2}$.

In an experiment,the input characteristics are shown for a $CE$ configuration $n-p-n$ transistor for different output voltages. Based on the graph,which of the following is correct?

Similar Questions

$A$ common emitter amplifier circuit,built using an $npn$ transistor,is shown in the figure. Its $dc$ current gain is $250$,$R_C = 1\,k\Omega$ and $V_{CC} = 10\,V$. What is the minimum base current for $V_{CE}$ to reach saturation? (in $\mu A$)

In an $n-p-n$ transistor,$200$ electrons enter the emitter in $10^{-8} \ s$. If $1 \%$ of electrons are lost in the base,then the current that enters the emitter and the current amplification factor are respectively $\left[e=1.6 \times 10^{-19} \ C\right]$

In a $p-n-p$ transistor working as a common base amplifier, when the current gain is $0.96$ and emitter current is $7.2 \,mA$, the base current is (in $\,mA$)

In the given circuit,a transistor with a current gain $\beta = 100$ is used. To have $V_{CE} = 5 \text{ V}$ and $V_{BE} = 0$,what should be the value of the base resistance $R_b$?

In a common emitter transistor amplifier, the output resistance is $500 \text{ k}\Omega$ and the current gain $\beta = 50$. If the power gain of the amplifier is $5 \times 10^6$, what is the input resistance (in $\Omega$)?

Vedclass Test Series

Exam Paper Generator

Online Exam Module