In a meter bridge or Wheatstone bridge for the measurement of resistance,the known and the unknown resistances are interchanged. The error so removed is

In a metre bridge experiment (see figure), the positions of the cell, $E$, and galvanometer, $G$, are interchanged. We shall observe in the galvanometer:

In a meter bridge experiment,when a nichrome wire is in the right gap,the balancing length is $60 \ cm$. When the nichrome wire is uniformly stretched to increase its length by $20 \%$,and again connected in the right gap,the new balancing length is nearly: (in $cm$)

In a meter-bridge,if the left and right gaps are connected with $2 \Omega$ and $3 \Omega$ resistances,respectively,then the bridge is balanced. What resistance should be connected with the $3 \Omega$ resistance to get the balancing point at the midpoint of the bridge wire?

The resistances in the two arms of a meter bridge are $5\,\Omega$ and $R\,\Omega$,respectively. When the resistance $R$ is shunted with an equal resistance,the new balance point is at $1.6\,l_1$. The resistance $R$ is ................. $\Omega$.

$n$ identical resistors are taken,in which $\frac{n}{2}$ resistors are joined in series in the left gap and the remaining $\frac{n}{2}$ resistors are joined in parallel in the right gap of a metre bridge. The balancing length in $cm$ is