In the figure shown,the plank is being pulled | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) Let $v_{cm}$ be the velocity of the centre of mass of the cylinder and $\omega$ be its angular velocity.At the contact point between the cylinder

Vedclass · Accepted Answer

the speed of the centre of mass of the cylinder is $v/2$.

Vedclass · Answer

(D) Let $v_{cm}$ be the velocity of the centre of mass of the cylinder and $\omega$ be its angular velocity.At the contact point between the cylinder and the plank (bottom point),the velocity of the cylinder must match the velocity of the plank because there is no slipping. Thus,$v_{cm} - R\omega = v$ (assuming $v_{cm}$ is to the right and $\omega$ is clockwise).At the contact point between the cylinder and the top string (top point),the velocity of the cylinder must match the velocity of the string. Since the string is fixed to the wall,its velocity is $0$. Thus,$v_{cm} + R\omega = 0$.Adding these two equations: $(v_{cm} - R\omega) + (v_{cm} + R\omega) = v + 0$,which gives $2v_{cm} = v$,so $v_{cm} = v/2$.Subtracting the equations: $(v_{cm} - R\omega) - (v_{cm} + R\omega) = v - 0$,which gives $-2R\omega = v$,so $\omega = -v/(2R)$ (the negative sign indicates counter-clockwise rotation).Therefore,the speed of the centre of mass of the cylinder is $v/2$.

In the figure shown,the plank is being pulled to the right with a constant speed $v$. If the cylinder does not slip,then:

Similar Questions

$A$ horizontal platform is rotating with a uniform angular velocity about a vertical axis passing through its center. At some instant, a viscous liquid of mass $m$ is dropped at its center, which is free to spread and eventually falls off the edge. During this time interval, the angular velocity

$A$ plank with a uniform sphere placed on it rests on a smooth horizontal plane. The plank is pulled to the right by a constant force $F$. If the sphere does not slip over the plank,which of the following statements is incorrect?

$A$ uniform circular disc placed on a rough horizontal surface has initially a velocity $v_0$ and an angular velocity $\omega_0$ as shown in the figure. The disc comes to rest after moving some distance in the direction of motion. Then $\frac{v_0}{r\omega_0}$ is

$A$ pulley is hinged at the centre and a massless thread is wrapped around it. The thread is pulled with a constant force $F$ starting from rest. As the time increases,

$A$ uniform disc is rolling on a horizontal surface. At a certain instant,$B$ is the point of contact and $A$ is the topmost point of the disc,where $R$ is the radius of the disc.

Vedclass Test Series

Exam Paper Generator

Online Exam Module