In the given detector circuit,the suitable va | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) For a detector circuit (envelope detector),the condition for proper demodulation is $\frac{1}{f_c} < RC$,where $f_c$ is the carrier frequency.

Vedclass · Accepted Answer

$<< 10^9\, Hz$

Vedclass · Answer

(A) For a detector circuit (envelope detector),the condition for proper demodulation is $\frac{1}{f_c} Given $R = 1000\, \Omega$ and $C = 1000\, pF = 1000 	imes 10^{-12}\, F = 10^{-9}\, F$.The time constant $RC = 1000 	imes 10^{-9} = 10^{-6}\, s$.Therefore,$\frac{1}{f_c} > 10^6\, Hz$.However,in standard detector design,the carrier frequency must be much greater than the signal frequency but limited by the $RC$ time constant to follow the envelope. Based on the provided options and standard textbook problems,the condition is $f_c Calculating $\frac{1}{RC} = \frac{1}{10^{-9}} = 10^9\, Hz$.Thus,the carrier frequency should be $<< 10^9\, Hz$.

In the given detector circuit,the suitable value of carrier frequency is

Similar Questions

What is the advantage of an optical fibre?

$A$ carrier wave of peak voltage $60 \,V$ is used to transmit a message signal. Then the peak voltage of the modulating signal in order to have a modulation index of $90 \%$ is (in $\,V$)

Which of the following elements is doped to a fiber amplifier in an optical fiber communication system?

$A$ message signal of peak voltage $12 \ V$ is used to amplitude modulate a carrier signal of frequency $1.2 \ MHz$. The amplitude of the side bands is (in $V$)

The modulation index used in amplitude modulation of a message signal of peak voltage $10 \,V$ is $0.5$. By how much should the peak voltage of the carrier signal be changed, so as to obtain the modulation index of $0.8$, keeping the peak voltage of the message signal the same as before?

Vedclass Test Series

Exam Paper Generator

Online Exam Module