Match the type of elasticity involved:

System	Type of Elasticity
$(i)$ Suspension fibre of galvanometer	$(a)$ Linear
$(ii)$ Bending of beam	$(b)$ Shear
$(iii)$ Cutting piece of paper	$(c)$ Bulk
$(iv)$ Mechanical waves in fluid	$(d)$ Shear

If the length of a wire is reduced to half,then it can hold the ......... load.

If the breaking stress of a wire is $3.18 \times 10^{10} \, N/m^2$,what should be its minimum radius so that the wire does not break? (Refer to the figure for the masses attached to the pulley system,assume $g = 10 \, m/s^2$)

$A$ string of length $0.314 \text{ m}$ and Young's modulus $2 \times 10^{10} \text{ N/m}^2$ is connected to another string of length $B$ and Young's modulus both twice of those of $A$. This series combination of strings is then suspended from a rigid support and its free end is fixed to a load of mass $0.8 \text{ kg}$. The net change in length of the combination is . . . . . . $\text{mm}$. (radius of both the strings is $0.2 \text{ mm}$ and acceleration due to gravity $= 10 \text{ m/s}^2$) (Mass of both strings is to be neglected as compared to the mass of load)

In a series combination of copper and steel wires of same length and same diameter,a force is applied at one of their ends while the other end is kept fixed. The combined length is increased by $2 \ cm$. The wires will have ..........

Two identical wires of rubber and iron are stretched by the same weight. The number of atoms in the iron wire will be: