One end of the steel rod is clamped to the ro | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Young's modulus $Y$ is defined as the ratio of longitudinal stress to longitudinal strain:$Y = \frac{F/A}{\Delta l/l} = \frac{Fl}{A \Delta l}$Rear

Vedclass · Accepted Answer

$0.025$

Vedclass · Answer

(A) Young's modulus $Y$ is defined as the ratio of longitudinal stress to longitudinal strain:$Y = \frac{F/A}{\Delta l/l} = \frac{Fl}{A \Delta l}$Rearranging for the change in length $\Delta l$:$\Delta l = \frac{Fl}{AY}$Given:Force $F = mg = 1000 \,kg 	imes 10 \,ms^{-2} = 10,000 \,N$Length $l = 50 \,cm = 0.5 \,m$Area $A = 1000 \,mm^2 = 1000 	imes 10^{-6} \,m^2 = 10^{-3} \,m^2$Young's modulus $Y = 2 	imes 10^{11} \,Nm^{-2}$Substituting the values:$\Delta l = \frac{10,000 	imes 0.5}{10^{-3} 	imes 2 	imes 10^{11}}$$\Delta l = \frac{5,000}{2 	imes 10^8} = 2,500 	imes 10^{-8} \,m = 2.5 	imes 10^{-5} \,m$Converting to millimeters:$\Delta l = 2.5 	imes 10^{-5} 	imes 10^3 \,mm = 0.025 \,mm$

Similar Questions

$A$ metallic rod breaks when the strain produced is $0.2 \%$. The Young's modulus of the material of the rod is $7 \times 10^9 \,N/m^2$. The area of cross-section required to support a load of $10^4 \,N$ is:

Two copper wires $A$ and $B$ of lengths in the ratio $1: 2$ and diameters in the ratio $3: 2$ are stretched by forces in the ratio $3: 1$. The ratio of the elastic potential energies stored per unit volume in the wires $A$ and $B$ is

$A$ steel wire of length $L$ and area of cross-section $A$ is suspended from a rigid support. If $Y$ is the Young's modulus of the material of the wire and $\alpha$ is the coefficient of linear expansion,then the increase in tension when the temperature falls by $t^{\circ} C$ is:

$A$ steel rod of diameter $1\,cm$ is clamped firmly at each end when its temperature is $25\,^{\circ}C$ so that it cannot contract on cooling. The tension in the rod at $0\,^{\circ}C$ is approximately ......... $N$ $(\alpha = 10^{-5}/\,^{\circ}C, Y = 2 \times 10^{11}\,N/m^2)$

Vedclass Test Series

Exam Paper Generator

Online Exam Module