The coefficient of thermal conductivity of a metal rod depends on its

$A$ long metallic bar is carrying heat from one of its ends to the other end under steady-state. The variation of temperature $\theta$ along the length $x$ of the bar from its hot end is best described by which of the following figures?

$A$ slab consists of two identical plates of copper and brass. The free face of the brass is at $0^{\circ} C$ and that of copper at $100^{\circ} C$. If the thermal conductivities of brass and copper are in the ratio $1: 4$,then the temperature of the interface is (in $^{\circ} C$)

Two rods with thermal conductivities $K$ and $3K$ and equal cross-sectional areas are joined as shown in the figure. Their lengths are $1 \ cm$ and $2 \ cm$,respectively. If the temperatures of the two ends of this composite rod are $0^{\circ}C$ and $100^{\circ}C$ (see figure),then the temperature $\phi$ of their interface is:

Consider two rods of same length and different specific heats $(S_{1}, S_{2})$,conductivities $(K_{1}, K_{2})$ and area of cross-sections $(A_{1}, A_{2})$ and both having temperatures $T_{1}$ and $T_{2}$ at their ends. If the rate of loss of heat due to conduction is equal,then:

The two ends of a rod of length $L$ and a uniform cross-sectional area $A$ are kept at two temperatures $T_1$ and $T_2$ $(T_1 > T_2)$. The rate of heat transfer,$\frac{dQ}{dt}$,through the rod in a steady state is given by: